Specifications: Drive System Dual-X, and Y Axis Rack & Pinion drive. All drives use brushless servo motors. Cutting & Plotting Speed Thickness/material dependent Conveyor Belt Speed 8 inches/second (12m/min) Acceleration 0.3g Electrical Requirements Controls/PC: 200/230/400/460/575V 3ph, 50/60Hz Vacuum: 200/220/380/415/440/575V 3ph, 50/60Hz, 30 HP VFD Control Compressed Air Requirements Nominal: 7 bars (101 psi) Min. Pressure: 6 bars (87 psi) Max. Yield: 36 m3/hour (21 cfm) Sound Level <76db(A) Standard Sizes Addressable Width: 78" (2.0m) Addressable Length: 6.5' (2.0m) Useful Unloading Length: 78" (2.0m) Maximum Cutting Material Thickness Maximum Thickness of Compressed & Cut Material MPC-7000: 2.75" (7 cm) MPC-5000: 2.0" (5 cm) Maximum Thickness of Non-Compressed Material MPC-7000: 4.00" (10.0 cm) MPC-5000: 3.75" (9.5 cm)

MPC Multi-Ply Cutting System Model: MPC-7000, MPC-5000 Eastman's Multi-Ply Cutting System is an automated reciprocating straight knife cutter, with a conveyorized bristle cutting bed. Two models are available; the MPC-5000 is capable of cutting up to 2" (5cm) of compressed material, and the MPC-7000 which is capable of cutting up to 2.75" (7cm) of compressed material. Material is transferred from a spreading table to the cutting area where a polyethylene film automatically covers the spread to create an airtight seal. Equipped with a network based distributed motion control system, this real-time digital network incorporates machine intelligence with additional diagnostic, performance and reliability benefits. Both multi-ply cutting system models are capable of monitoring themselves; reporting faults and can alert operators if maintenance is required. Features High efficiency vacuum turbine ensures material edge hold down during the cutting process Standard reciprocating knife with sharpener assembly and optional single/dual hollow punch pneumatic drill Intellicut™ knife control software improves the quality of the cut from top to bottom ply Cutting area made up of long-lasting bristle blocks allowing the knife to pierce without damage Touch screen display and joystick conveniently located on cutting gantry Optional Features Lateral drive - motorized device for moving the cutter from one spreading table to another Automatic bristle cleaner Resealer - seals cut areas to provide maximum vacuum hold down Width reducer - reduce the working cutting width by adding an airtight strip on the non-used area of the cutting bed See Compatible Spreading Systems

Contact Eastman Machine
779 Washington Street
Buffalo, New York 14203 U.S.A.
phone: +1-716-856-2200
toll-free: +1-800-872-5571
fax: +1-716-856-1140