Specifications:

Software

Windows® operating system

Drive System

Dual-X, Y and Theta Axis Rack and Pinion Drive, Brushless Servo Motors

Drive Power

Dual X/Y and Theta axis "brushless" servo motors

Cutting & Plotting Speed

60 inches per second (152.4cm/s)

Acceleration

1.3G

Electrical Requirements

Controls/PC: 120/240V; 1 phase, 50/60Hz, 3.6KVA

Vacuum: 230V/460V; 3 phase, 50/60Hz, 7.5HP

Compressed Air Requirements

75-100 psi at 15 scfm

Sound Level

<75 dbA

Standard Sizes

Active Cutting Widths (inches): 60 in., 72 in., 78 in., 96 in., 108 in., 114 in.
Active Cutting Widths (meters): 1.5m, 1.8m, 2.0m, 2.4m, 2.7m, 2.9m
Custom widths available in 6 inch (15.2 cm) increments

Overall Table Lengths (feet): 12 ft., 24 ft., 36 ft., 48 ft., 60 ft.
Overall Table Lengths (meters): 3.7m, 7.3m, 11.0m, 14.6m, 18.3m
Custom lengths available in 4 ft. (1.2m) increments

Maximum Cutting Material Thickness

Material dependent

Machine Weight

~3,500 lbs. (15kN)

Static Table System

Eastman's Static Table System provides superior cutting performance and increased throughput. Capable of marking, cutting, drilling and punching virtually any flexible material at speeds of up to 60 inches per second (152.4cm/s); the Static table system registers accuracy of +/- .015 inches (.4mm), with higher accuracies available.

The user interface of EasiCut™ is virtually intuitive. The software makes it easy to control tool types, speeds, accelerations, and restart a file, or recut pieces. EasiCut™ aids efficiency by removing common lines, duplicate entities, and edge cuts. Material is spread across the static table and its internal blower system ensures material hold-down for cutting accuracy.

The Eastman M9000 static cutting table that we purchased is being used to cut Kevlar® fabric. This fabric is cut and sewn into targets used for the ballistic testing in the development of Military body armor. The M9000 has reduced our labor costs and increased our uptime for this development work. This is critical in meeting the needs of the U.S. Military.

Pat Fitzgerald
Dupont Company
Kevlar® Life Protection
Research & Development

Features:

Robust Design and Performance

Single or low-ply layer cutting
Open vacuum system design for evenly dispersed airflow
Optimal material hold-down across the cutting surface
Standard three-tool cutting head
Standard porous plastic table top
Optional Lexan®, Urethane, PVC and microfiber table tops
Consistent high-speed cutting and repeatable accuracy
Ideal for prototyping and sample making
Optimum material yields, labor savings and lower operating costs
Standard and custom vacuum zoning available
Four remote emergency stops: two on gantry, two table mounted
Diode laser pointing alignment tool
Choice of extended warranty plans

Contact Eastman Machine
779 Washington Street
Buffalo, New York 14203 U.S.A.
phone: +1-716-856-2200
toll-free: +1-800-872-5571
fax: +1-716-856-1140