Eagle-S125 Combi Laser & Static Table Cutting System
Eagle-S125 Combi Laser/Static Tool Head

Combi Laser – Cutting Static Table

The Eastman combination laser and cutting system offers a laser for cutting fabrics that require a fused edge as well as the proven, reliable technology of Eastman’s static cutting table. The tool head is equipped with a 200 watt gas assist laser (100 watt optional), three individually aligned and calibrated tool spindles, and a pneumatic pen/marker holder.

The static table system is available in a range of system lengths and widths to meet the demands for prototypes, one-offs and full-production runs. The system’s high-precision configuration features multi-axis motion for more defined and accurate cuts. Material is spread across the static table by an operator.

  • Cut, mark, punch and seal edges all on one system
  • Laser provides cintered edge to prevent fraying – great for materials like nylon and other materials that unravel.
  • Single gantry design offers three cutting tools, a laser and a marking tool, minimizing switchover time between material files and set up. (Laser and blade cutting cannot be performed simultaneously).
  • 200 watt laser has no contact with the fabric, improving the quality and speed of the cut
  • Adjustable laser power within software, reducing unnecessary operating costs
SKU: Laser Category:

Cutting Surface

The standard surface for cutting with the laser is a perforated honeycomb core metal table top. A supplemental table surface is supplied as a roll-down for use when cutting with traditional blades.

International Compliance Ratings

The operating computer and control cabinet are housed in an ergonomic enclosure that can be sealed to offer dust and water resistant protection in harsh or high particulate environments. Additionally, cabling connectors, servo motors and display components meet recognized international protection ratings requirements.

Made to Order

Available in a range of widths, lengths and various tool head accessory options, the S125 with laser will be built to match your application needs, allowing you to customize the tools and capabilities to maximize productivity.

Industrial Design for Rigorous Use

  • Advanced electro-pneumatic regulator for precise tool pressure control
  • Heavy-duty cable connectors
  • Easy access, sealed doors for inspection and maintenance
  • Heavy-gauge steel construction with scratch-resistant powder coated finish

Safety

  • Gantry-mounted, laser enabled indicator light
  • Four remote emergency stops: two on cutting gantry, two system-mounted
  • Additional gantry-mounted stop disks pause system operation until returned to neutral and reset. Operation can then be resumed from any position
  • Tool head is equipped with plexiglass safety window to keep hands free of knife during operation
  • Single turn-off point with a universal power system for lockout/tagout safeguards employees from unexpected start-up
Width

72 in. (1.82m) 78 in. (1.98 m) Please contact the factory for active cutting zone dimensions. Custom widths available, please contact the factory for more information.

Length

Up to 100ft. (30m) Please contact the factory for active cutting zone dimensions. Custom lengths available, please contact the factory for more information.

Electric - Control Power/PC

230V, 3 ph, 50/60 Hz, 30 amps

Electric - Vacuum Blower

208/230/380/460V, 3 ph, 50/60 Hz, 7.5 HP, VFD control optional

Power: Pneumatic

75 – 90 psi at 15 SCFM (5.17 – 6.2 bars at 0.42cmm)

Maximum Laser/Plotting Speed

Material and table length dependent.

Compressed Air Consumption

15 CFM

Sound Level

<75 db(A)

Operating Temperature

55 – 100°F (12 – 37°C)

Humidity

20 – 80% (non-condensing)

Disclaimer

Achievable speeds and accelerations are tool, material and thickness dependent. All indicated speeds, dimensions, weights and performance data are approximate and subject to change without notice.

Eagle S125 Sell Sheet - English.pdf

Eastman Laser Sell Sheet - English.pdf


Global Sales

Headquarters


International Representative Offices

Austria


Belarus

Canada

China

France



Germany

Hong Kong

India


Kazakhstan

Korea


Netherlands


Russia

  • Composite Solutions

    Mr. Ilya Tarasov
    Sofiiskaya 8\1
    Saint Petersburg 192236
    Russia

    tel: 8 800 500-76-93
    info@compositesolutions.ru
    www.compositesolutions.ru

South America

CMP Trading

Rua das Arraias, 80 - sala 25
Ed. Espaço Aquarius
Jardim Aquarius
São José dos Campos - SP
Brazil

Phone:+55 (12) 3206 8401 / 3206 8704
Mobile:+55 (12) 9 8156 8390

Email: fabricio.bandeca@cmptrading.com

Website: http://www.cmptrading.com

Sales Representative for:

  • Argentina
  • Bolivia
  • Brazil
  • Chile
  • Colombia
  • Peru
  • Uruguay
  • Venezuela

Spain

  • Matic S.A.

    Cami Cal Ros Dels Ocells, 24
    Poligon Industrial Coll De La Manya
    08403 Granollers (Barcelona)
    Spain

    Tel: +34-93-274-50 06
    Fax: +34-93-345-29-48

    CONTACTS: Mr. Jordi Carbonell
    info@matic.es

Switzerland


Ukraine

United Kingdom

  • Eastman Staples Ltd.

    Tel: +44-1484-888-888
    Fax: +44-1484-888-800

    CONTACT: Mr. Colin Werb
    CWERB@EASTMAN.CO.UK

Uzbekistan